The FC-30 is a Feed Conveyor designed specifically to feed our HPC-30 machine. The unit is mobile and includes a storage Hopper and Grizzly for removal of oversize material.
The durable, low-maintenance FC-30 is designed to match the feed rates required by our HPC-30 Concentrator whether processing fine or coarse material.
Hopper volume sufficient to supply a steady feed rate without interrupting processing to ensure optimum productivity.
Mobility and compact design mean easy loading for shipment and transportation on-site.
Hopper height suitable for a wide range of loading machinery. The removable Grizzly box screens prevent any oversize material from entering the Hopper.
Adjustable Feed Gates allow precise control of the flow of material from the Hopper onto the Conveyor. Two interchangeable gates – for fine and coarse material – are supplied with the machine.
Operators can quickly and easily change the Feed Gate setting from either side of the Conveyor Belt.
Adjustable Landing Legs enable you to adjust the height of the FC-30 according to the location and height of the HPC-30.
Conveyor Support Legs maintain stability of the conveyor and can be set to suit the terrain.
Troughed conveyor idlers prevent material from spilling off the conveyor belt. Idler brackets are designed for easy maintenance of idlers.
A self-tensioning Belt Scraper installed on the inside of the conveyor belt, helps to keep Idlers and Pulleys clean.
The winged lower Conveyor Pulley minimizes damage and wear of the Conveyor Belt. Tensioners allow for quick and easy tracking and tensioning of the belt.
The fully adjustable Drive System is mounted at the end of the conveyor belt, a safe distance away from the Hopper and Feed Gate.
In addition to feed rate control using the adjustable Feed Gates, a digital controller which controls the conveyor belt speed can also be used for precise control of the rate at which material is fed to the HPC-30.
The Digital Controller and Circuit Breaker are housed in a Waterproof Electrical Cabinet which can be mounted on the HPC-30 or separately.
Drive System sprockets can easily be changed. This allows for an extremely broad range of conveyor belt speeds to facilitate feeding of almost any material in different applications requiring either very low or very high feed rates.
The A-Frame and Hitch used when towing the FC-30 can easily be detached when the machine is installed. This prevents damage and allows for easier access to the machine with earth-moving machinery.
Heavy duty axle and wheels are designed for towing over rugged terrain and can be removed and stored whilst the FC-30 is in operation.
Custom built FC-30 machines are also available. This unit was designed to accommodate requirement of an extra-high feed discharge.
Custom built units where Grizzly boxes were removed and Hopper capacity increased for processing of fine material from tailing dumps.
FC-30 and accessories ship in a 20′ or together with HPC-30 in a 40′ container. Shipping container may be purchased to be converted into an on-site workshop or secure storage room.